Mini Christmas Tree

This is a Mini Christmas Tree, 
the height is only 4.3 cm, 
it is very cute, 
you can download the free pattern 
at my site: http://www.amanda-craft.com.tw/

We start to make one. 
Are you ready?

I used Moss Green Parchment Paper.
Perforare all black dots with 1-needle bold one the Embossing and Perforating A4 Diagonal Grid. (Pattern 1~5)

Turn to back, emboss the area between all 1-needle bold perforations using Wheel, other petals are the same.

Turn to front.

Perforate the holes again with 1-needle and enlarge the hole on the center.

Cut all black lines and along the outlines.

All components:
Pattern A--- 3 pieces
Pattern B--- 4 pieces
Pattern C--- 4 pieces
Pattern D--- 4 pieces
Pattern E--- 5 pieces
Pattern F (Rib)--- at least 5 cm (diameter 1 mm)
3mm bead ---15 pieces
Rhinestones(SS12) ---2 pieces

Turn to back, roll all petals with tweezers.

The rib passes 
A-bead-A-bead-A-B-bead-B-bead-B-bead-B-C-bead-C-bead-C-bead-C-D-bead-D-bead-D-bead-D-E-bead-E-bead-E-bead-E-bead-E

****Very important****
Two flowers must be staggered and need to press with tweezers, then wait Glue dry.

Finished!

press all petals down with finger.

Glue Phinestones on the top of tree.

You can put it into a battle, of course you have to cut the rib.
Completed!
Hope you enjoy doing one, two, ... and many.
Merry Christmas!